Analogue and digital line of VISITOR devices T30 and T40.
The VISITOR T30C is a versatile mobile X-ray unit, extremely easy to maneuver and position. The power of the high-frequency generator is 32 kW, the maximum peak operating voltage is 125 kV and the current is 400 mA, a two-focus tube with a rotating anode, all this allows the VISITOR T30 device to work in any area - both in trauma radiography, and in pediatrics, orthopedics or for the needs of surgery.
VISITOR T30 C-DR is the digital version of VISITOR T30C. Portable digital flat-panel detectors of format from 24x30 cm to 43x43 cm are used with the device, which corresponds to a standard survey image and allows you to study any organ. The dose load on the patient when using studies in digital mode is significantly lower than when using film cassettes, while the digital image appears on the screen in a matter of seconds after exposure and is of high quality.
The VISITOR T30 R-DR is a digital mobile device designed for maximum ease of use at the patient's bedside, as well as for demanding clinical applications where high performance and better image quality are required. The compact and lightweight design of the mobile device, along with flexible x-ray tubes mounted on a rotating column, makes it easy to place it close to the patient's bed.
With a 32 kW, 125 kV RF generator and a rotating anode X-ray tube, the VISITOR T30 R-DR is able to maintain the high performance and inherent image quality required in intensive care, orthopedics and surgery. The VISITOR T30 R-DR Digital Data Acquisition System is based on a 19" touch screen computer and a portable flat panel detector. The user interface of the software is designed to allow easy selection of exposure parameters, which can be set automatically by a large number of anatomy programs.
The VISITOR T30 M-DR and T40 M-DR high-end digital mobile units are equipped with a powerful X-ray source based on a 32 or 40 kW generator and a high thermal density X-ray tube, which helps to properly cover demanding clinical programs where the best possible image of the maximum quality. With a battery-powered system that supports both motorized movement and X-ray exposure, the operator enjoys the ease of use of a mobile system and achieves maximum work efficiency by being able to perform an examination anywhere, without being connected to the mains.
Get a high-quality mobile device for X-ray diagnostics at a bargain price today!
For more information and a price offer for this model, fill out the feedback form on the website.
Characteristics:
Mobile radiographic apparatus Visitor T30/T40
Generator power: 32/40 kW
Microprocessor control
2-point programming system
Maximum voltage 125/130 kV, maximum current 400 mA
Collimator: manual control with internal light source and timer
Dosimeter DAP
Flat panel detector from 24x30 cm (neonatal) to 43 x 43 cm.
Operator workstation